Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.     

肠道微生物对土壤中铜、锌、锰生物可给性的影响

为了更全面、准确地评价土壤中金属元素对人体的健康风险,研究土壤中金属元素在结肠阶段的生物可给性具有重要意义。通过采集我国一些地区的6种土壤,利用in vitro方法(PBET和SHIME联用)研究土壤中Cu、Zn、Mn在胃、小肠、结肠阶段的生物可给性。研究显示,土壤中Cu、Zn、Mn在胃阶段的生物可给性分别为23.8%~63.0%、21.2%~64.4%、11.7%~35.6%;从胃阶段到小肠阶段,土壤中Cu的生物可给性提高了0.4%~14.4%,而土壤中Zn在小肠阶段的生物可给性降低了6.7%~38.7%。结肠阶段,土壤中Cu、Zn、Mn的生物可给性分别为2.4%~12.9%、5.7%~18.7%、6.2%~18.9%,与小肠阶段相比,分别降低了21.7%~56.9%、0.4%~36.8%、4.5%~19.1%。结果表明,在肠道微生物存在的情况下,土壤中Cu、Zn、Mn在结肠阶段有较低的人体健康风险。     

黄、渤海滨海带大气颗粒物时空分布与来源特征

PM10作为大气污染物监测的主要指标之一,探究大气PM10浓度对大气环境质量和人体健康评价具有重要意义。黄、渤海滨海带包括京、津和辽、冀、鲁、苏等工、农业大省,区域大气PM10污染的时空分布和来源特征具有复杂性和典型性。在锦州、北京、天津、烟台、青岛、连云港和盐城7个城市布设10个采样点,含7个城市点和3个农村点,开展为期一年的大气颗粒物的采样;同时,于冬季1月和夏季7月在锦州、天津和烟台进行合计60 d的加密采样,藉以确定研究区域大气PM10的时空分布和来源特征。结果表明,黄、渤海滨海带大气年均PM10总浓度为(129’18)"g·m~(-3),单月最低值出现在2015年7月盐城农村样点15"g·m~(-3),最高值为2015年3月北京城市点307"g·m~(-3)。盐城大气PM10浓度(城市点(85’27)"g·m~(-3)和农村点(66’35)"g·m~(-3))显著低于其他样点大气PM10浓度。渤海滨海带中西部的京(140’68"g·m~(-3))、津(169’60"g·m~(-3))两市大气PM10年均浓度显著高于东部的锦州(125’41"g·m~(-3))和烟台(109’31"g·m~(-3));而且黄海滨海带大气PM10年均浓度(114"g·m~(-3))显著低于渤海滨海带年均浓度(136"g·m~(-3)),总体上表现出西高东低、北高南低的特征。黄、渤海滨海带城市点和农村点年均浓度分别为(129’18)"g·m~(-3)和(112’30)"g·m~(-3);农村点春冬季大气PM10浓度和城市点浓度相当,无显著差异,夏秋季大气PM10浓度略低于城市浓度,表明农村地区大气颗粒物污染情况也较为严重,需受到关注。区域内PM10浓度季节变化整体表现为春冬高、夏秋低。利用多元回归分析初步判断黄、渤海滨海带PM10属于复合来源,大气PM10浓度约30%的变化与降水、人均能耗和沙尘天气相关。黄、渤海滨海带大气PM10浓度的昼夜变化不大,大气PM10浓度与气温呈现正相关,与风速和降水呈现负相关,表现为受各种气象因素综合作用的影响。     

Uptake of PAHs by cabbage root and leaf in vegetable plots near a large coking manufacturer and associations with PAHs in cabbage core

Samples of ambient air (including gaseous and particulate phases), dust fall, surface soil, rhizosphere soil, core (edible part), outer leaf, and root of cabbage from eight vegetable plots near a large coking manufacturer were collected during the harvest period. Concentrations, compositions, and distributions of parent PAHs in different samples were determined. Our results indicated that most of the parent PAHs in air occurred in the gaseous phase, dominated by low molecular weight (LMW) species with two to three rings. Specific isomeric ratios and principal component analysis were employed to preliminarily identify the local sources of parent PAHs emitted. The main emission sources of parent PAHs could be apportioned as a mixture of coal combustion, coking production, and traffic tailing gas. PAH components with two to four rings were prevailing in dust fall, surface soil, and rhizosphere soil. Concentrations of PAHs in surface soil exhibited a significant positive correlation with topsoil TOC fractions. Compositional profiles in outer leaf and core of cabbage, dominated by LMW species, were similar to those in the local air. Overall, the order of parent PAH concentration in cabbage was outer leaf > root > core. Partial correlation analysis and multivariate linear stepwise regression revealed that PAH concentrations in cabbage core were closely associated with PAHs present both in root and in outer leaf, namely, affected by adsorption, then absorption, and translocation of PAHs from rhizosphere soil and ambient air, respectively.     

武汉地区水环境中全氟化合物污染水平及其分布特征

武汉作为中国氟化工行业的主要生产基地之一,其水环境中全氟及多氟类化合物(PFASs)污染情况对评估该地区水环境生态安全至关重要。采集了武汉城区10个污水处理厂进、出口污水和19个地表水样品,利用HPLC-ESI-MS/MS技术分析研究该区域水环境中PFASs污染水平及其分布特征。结果发现,武汉地区的污水和地表水样品中,PFASs污染均以短链同系物全氟丁酸(PFBA)和全氟丁基磺酸(PFBS)为主。污水处理厂进、出口污水中PFASs总浓度分别为11.8~12 700 ng·L~(-1)和19.1~9 970 ng·L~(-1)。在城区15个湖水样品中,PFASs总浓度为21.0~10 900 ng·L~(-1);在流经城区的4个江水样品中,PFASs总浓度为4.11~4.77 ng·L~(-1),比湖水样品中PFASs浓度水平低1~2个数量级。与污水中PFASs空间分布趋势一致,各湖泊水样中PFASs总体水平呈现汉口汉阳武昌的趋势,表明城市工业布局与人口密度程度直接影响城市PFASs污染空间分布。值得注意的是,与以往水环境中PFASs污染以全氟辛酸(PFOA)和全氟辛基磺酸(PFOS)为主不同,武汉地区水环境中PFASs污染以短链同系物为主,表明短链替代效应已经渐渐在中国化工领域出现,中国全氟行业在响应国际组织规范和建议的基础上做出了实质性进展。然而,对于短链PFASs的污染特征、迁移运输以及生态风险等科学问题,还需要更进一步的研究。     

汉江流域土地利用/覆被变化的水文效应模拟研究

针对流域LUCC驱动因子众多、驱动因子与土地利用/覆被变化之间存在复杂的非线性动态关系的特点，以汉江上游流域LUCC模拟为例，构建基于人工神经网络（ANN）与元胞自动机（CA）的模拟土地利用/覆被变化的CA ANN耦合模型，并应用该模型预测汉江上游流域2020s年代的LUCC变化情景。结果表明：2020s汉江黄家港站上游流域水田、旱地、灌木林与建设用地面积均有不同程度的增加，其中建设用地增幅最大，与区域交通和城市化的迅猛发展趋势相符；除建设用地增幅变化较大之外，1980s～2000s与2000s～2020s两个时期其余土地利用/覆盖类型的面积变化率都比较相近，表明CA ANN耦合模型能够刻画土地利用/覆盖类型的转换规律，在流域土地利用/覆被变化的复杂非线性动态演变情景的模拟预测方面是可行的。在此基础上，应用SWAT分布式水文模型模拟汉江上游流域水文过程。研究结果表明：在1980s年代、2000s年代及预测的2020s年代LUCC情景下，汉江上游流域年平均径流量呈增加趋势，LUCC对径流量年内影响较汛期显著，多年平均蒸散发量呈增加趋势     

广州夏季办公室内细颗粒中多环芳烃污染特征研究

大部分的都市办公人群每天在办公室至少度过8 h。而室外环境的渗透、办公室内吸烟、办公设备使用和中央通风系统均可能导致细颗粒物及多环芳烃(PAHs)在室内积聚而造成微环境污染。2015年5—6月,在广州市3种不同功能区(商住区、高新产业区、工业区)共选取了14间不同类型的办公室,对其室内外PM_(2.5)和多环芳烃进行同步监测。结果表明,(1)14间中有12间办公室内的PM_(2.5)浓度水平高于世界卫生组织(WHO)的推荐值25μg·m-3;(2)与国内外类似研究相比,办公室内外∑16PAHs及Ba P-eq的监测浓度水平均较低,并呈现一致规律:文印>室外>吸烟>多人>单人>无窗(无人),其中Ba P-eq低于欧盟规定的安全限值1 ng·m-3;(3)文印工作和吸烟行为与室内PM_(2.5)和PAHs浓度升高有密切关系,分别对5环和4环PAHs贡献明显;(4)其他无明显内源的办公室的细颗粒中PAHs污染在监测期间主要来源于室外贡献。     

石墨烯纳米材料对哺乳动物的毒性及其作用机制

石墨烯是一种应用广泛的新兴非金属纳米材料，具有独特的电学机械性能、超大的比表面积以及潜在的生物相容性，在材料、电子、能源、光学以及生物医学等领域得到广泛应用。与此同时，石墨烯的环境行为和生物毒性也随之引起日益广泛的关注。本文通过对石墨烯纳米材料的动物毒性、细胞毒性、毒性影响因素和毒性机制等相关研究进展进行总结。石墨烯纳米材料可通过气管滴注、吸入、静脉注射、腹腔注射以及口服等方式进入体内，通过机械屏障、血脑屏障和血液胎盘屏障等积累在肺、肝、脾等部位引起急性或者慢性损伤；目前有关石墨烯毒性机制的研究主要集中于线粒体损伤、DNA损伤、炎性反应、凋亡等终点及氧化应激参与的复杂信号通路，不同石墨烯纳米材料的浓度、尺寸、表面结构和官能团等对石墨烯的生物毒性影响不同。鉴于当前该领域研究的局限性，对石墨烯纳米材料生物毒性研究的发展方向进行了展望，进而为石墨烯材料的安全应用提供理论借鉴和实践参考。     

Volcano-related materials in concretes: a comprehensive review

Massive volcano-related materials (VRMs) erupted from volcanoes bring the impacts to natural environment and humanity health worldwide, which include generally volcanic ash (VA), volcanic pumice (VP), volcanic tuff (VT), etc. Considering the pozzolanic activities and mechanical characters of these materials, civil engineers propose to use them in low carbon/cement and environment-friendly concrete industries as supplementary cementitious materials (SCMs) or artificial/natural aggregates. The utilization of VRMs in concretes has attracted increasing and pressing attentions from research community. Through a literature review, this paper presents comprehensively the properties of VRMs and VRM concretes (VRMCs), including the physical and chemical properties of raw VRMs and VRMCs, and the fresh, microstructural and mechanical properties of VRMCs. Besides, considering environmental impacts and the development of long-term properties, the durability and stability properties of VRMCs also are summarized in this paper. The former focuses on the resistance properties of VRMCs when subjected to aggressive environmental impacts such as chloride, sulfate, seawater, and freezing–thawing. The latter mainly includes the fatigue, creep, heat-insulating, and expansion properties of VRMCs. This study will be helpful to promote the sustainability in concrete industries, protect natural environment, and reduce the impacts of volcano disaster. Based on this review, some main conclusions are discussed and important recommendations regarding future research on the application of VRMs in concrete industries are provided.